1. Capacities (kg): 100 to 5000
2. Compact structure, easy to install
3. Compression load cell
4. Low profile, spherical designing
5. High quality alloy steel with nickel plating
6. Degree of protection can reach to IP68
7. Analog output 4-20mA is optional
1. Weighing level meter
2. Suitable for force measurement and control of material level
LCD801 is a low profile circular plate load cell, 0.1t to 5t, made of alloy steel, nickel-plated on the surface, the analog output is optional in millivolts or 4-20mA, and the built-in circuit board will digitalize the chip with built-in sensor flexibility Among the components, the cost of the transmitter is saved, and calibration-free is realized, thereby solving the problem of difficult calibration on site, and is suitable for force measurement and control of material level.
| Specifications: | ||
| Rated Load |
kg |
100,300,600,1200,2000,5000 |
| Rated Output |
mA |
4-20mA |
| Zero Balance |
%R.O. |
±1 |
| Comprehensive Error |
%R.O. |
±0.3 |
| Creep/30 minutes |
%R.O. |
±0.05 |
| Non-linearity |
%R.O. |
±02 |
| Hysteresis |
%R.O. |
±02 |
| Repeatability |
%R.O. |
±0.05 |
| Compensated Temp.Range |
℃ |
-10~+40 |
| Operating Temp.Range |
℃ |
-20~+70 |
| Temp effect/10℃on output |
%R.O./10℃ |
±0.1 |
| Temp effect/10℃ on zero |
%R.O./10℃ |
±0.1 |
| Recommended Exctation Voltage |
VDC |
24 |
| Insulation resistance |
MΩ |
=5000(50VDC) |
| Safe Overload |
%R.C. |
150 |
| Ultimate Overload |
%R.C. |
300 |
| Material |
Alloy Steel/Stainless Steel |
|
| Degree of protection |
P67/IP68 |
|
| The length ofthe cable |
m |
6 |
| Wiring code |
Ex: |
Red:+Black:- |
|
Sig: |
Green:+White:- |
|
|
Shield: |
Bare |
|