1. Capacities (t): 1 to 16
2. Compact structure, easy to install
3. Compression load cell
4. Low profile, spherical designing
5. High quality alloy steel with nickel plating
6. Degree of protection can reach to IP68
7. Analog output 4-20mA is optional
8. The height is very low, the height is less than 48mm
9. Be matched with top plate and bottom plate
1. Weighing level meter
2. Level control of liquid and bulk materials
LCD805 is a low profile circular plate load cell, 1t to 16t, made of alloy steel, nickel-plated on the surface, the analog output is optional in millivolts or 4-20mA, and the built-in circuit board integrates the digital chip into the sensor elastic element Among them, the cost of the transmitter is saved, and calibration-free is realized, thereby solving the problem of difficult on-site calibration, and is suitable for force measurement and control of material level.
| Specifications: | ||
| Rated Load |
t |
1,2,3,5,10,16 |
| Rated Output |
mV/N |
2.0±0.0025 |
| Zero Balance |
%R.O. |
±1 |
| Comprehensive Error |
%R.O. |
±0.3 |
| Creep/30 minutes |
%R.O. |
±0.05 |
| Non-linearity |
%R.O. |
±0.05 |
| Hysteresis |
%R.O. |
±0.2 |
| Repeatability |
%R.O. |
±0.05 |
| Compensated Temp.Range |
C |
-10~+40 |
| Operating Temp.Range |
C |
-20~+70 |
| Temp.effect/10℃ on output |
%R.O./10℃ |
±0.01 |
| Temp.effect/10℃on zero |
%R.O./10℃ |
±0.01 |
| Recommended Excitation Voltage |
VDC |
5-12 |
| Insulation resistance |
MΩ |
=5000(50VDC) |
| Safe Overload |
%R.C. |
150 |
| Ultimate Overload |
%R.C. |
300 |
| Material |
Alloy Steel/Stainless Steel |
|
| Degree of protection |
IP67/IP68 |
|
| The length of the cable |
m |
6 |
Product specifications are subject to change without notice.
